n-k-fitness-and-rehab-products
Results: 15
Hamilton Iso-Quadron (Model Nk 73)
The Hamilton Iso-Quadron, model NK 73, is a leg exerciser designed to exercise the knee and quadriceps. The Hamilton Iso-Quadron utilizes short arc exercises to elicit hamstring reinforcement of quadriceps muscles. The range of motion is increased in conjuction with terminal extension strength and hamstring reinforcement. It can be used to test hamstring strength, provide passive stretching of weakened, damaged or post surgical knees, for compression isometrics or for lengthening contractions. T
Mat Platform (Models Nk 736 & Nk 737)
The Mat Platforms are mat tables designed for use in a therapeutic setting so that an individual's limbs may be manipulated. The mat is a 2-inch polyurethane foam pad covered with naugahyde and the platform has chrome plated steel legs. The free standing platform (NK 736) has adjustable floor guides and a rubber bumper around the edge. The wall mounted folding mat platform (NK 737) has push button leg supports, pivots up and down with three legs to support it on the floor and is secured against
Manual Tilt Table (Model Nk 680)
The Manual Tilt Table, model NK 680, is designed to allow an individual to be placed in a tilted position at angles from 0 to 90 degrees, indicated by a protractor. The table is manually operated by the use of a lare Acme screw rod and has a steel frame and an enamel finish. The top has a foam pad covered in naugahyde and the footboard has a nonslip covering. Three restrainer straps with Velcro closures are included. An Extra Wide Model (NK 686) and a Low Boy Tilt Table (NK 685), which is design
Upholstered Knee Board (Model Nk 640)
The Upholstered Knee Board, model NK 640, is a quadriceps board designed to be used for muscle exercises by a person lying in the supine position. The hardwood unit consists of a bottom board with slots and a 2 section upholstered upper board with a hinge and 8 position adjustment to accommodate varying amounts of knee flexion. DIMENSIONS: Femoral board is 11 inches long; tibia board is 18 1/2 inches long. The unit adjusts from 4 1/2 to 12 inches high. Overall size is 5 1/4 x 30 inches long.
Exercise Unit (Model Nk 45)
The Exercise Unit, model NK 45, is an exercise machine designed for use in exercising the lower extremities. The unit is useful for resistive exercise programs for the knee, particularly the quadriceps and hamstring muscles. The unit consists of an electric welded steel frame with the top covered by naugahyde over foam padding. The chrome torque unit has an easy-to-read range of motion indicator, padded adjustable leg rest and stationary weight holder with securing cuff in addition to a pull pin
Restrainer Strap (Model Nk 682)
Restrainer Straps, model NK 682, are designed for use with tilt tables to secure an individual to that table. The strap utilizes metal buckle fasteners for secure locking and quick release. The webbing is a high test nylon sewn on a canvas restrainer strap. COMPATIBILITY: Fits all NK Products tilt tables. DIMENSIONS: 5 inches wide x 97 inches long.
Gait Training Stairs (Model Nk 647)
The Gait Training Stairs, model NK 647, are training stairs designed to assist individuals in step and gait exercises. The corner design is constructed of 3/4 inch plywood with walnut paneling on exposed surfaces. The platform and steps are covered with rubber matting and edged in aluminum molding with stainless steel handrails placed at a height of 38 inches for adult use. DIMENSIONS: The steps have four 6-inch high steps on one side and six 4-inch high steps on the other side. The platform mea
Training Stairs, Straight Type (Model Nk 962)
The Training Stairs, Straight Type, model NK 962, are training stairs designed to be used for gait and step exercises. The staircase is suitable for use in any area and the steps and platform are covered with indoor-outdoor carpet. The unit is made of plywood with an exterior enamel finish. Rigid metal handrails are made of square tubing and are 37 inches above the platform. DIMENSIONS: There are three 4-inch steps on one side and two 6-inch steps on the other side. The steps are 11 inches deep.
Wall Mounted Shoulder Wheel (Model Nk 690)
The Wall Mounted Shoulder Wheel, model NK 690, is a shoulder wheel designed to assist individuals in an exercise program to increase muscle strength and range in the upper extremities. The shoulder wheel has all chrome plated parts except for the painted wheel rim. A 42-inch diameter wheel rotates on a double ball bearing mounting and a brake lining type resistance device applies constant resistance to the wheel as needed. The hard plastic rotating handpiece is mounted on one crossbar and has 20
Shoulder Rotator (Model Nk 693)
The Shoulder Rotator, model NK 693, is a wall mounted shoulder exercise device for increasing the range of motion and muscle strength in the upper extremity. A pivot arm rotates on roller bearings and resistance is applied by hand control knob. The Shoulder Rotator mounts on a vertical post that attaches to the wall, with the bottom bracket 34 inches from the floor. The unit has 30 inches of height adjustment for use in either sitting or standing position. The handle adjustment permits a 48 inch
Wall Pulley Unit (Model Nk 668)
The Wall Pulley Unit is a weight exercise unit designed to be used as part of an exercise program for arms and legs. The pulleys are completely adjustable from the floor to six feet high so that any desired angle or pull may be attained. The unit uses slotted disc weights (not included). The handles are removable for attachment of thigh, ankle or wrist cuffs. Two guide rods keep weights in place while the unit is in operation. Base plate is padded with rubber to decrease noise when weights are
Finger Shoulder Ladder (Model Nk 651)
The Finger Shoulder Ladder, model NK 651, is designed to be used as part of an upper extremity exercise program. The ladder has 25 steps 2 inches apart, curved to match the natural motion of the arm. The unit mounts on the wall with the bottom mounting bracket set 40 inches from the floor. A chrome plated vertical post allows 28 inches of height adjustment.
Adjustable Parallel Bars (Model Nk 675 & Nk 676)
Adjustable Parallel Bars are parallel bars designed for use in gait training. The standard unit (model NK 675) has 1.5inch diameter rails and a tan hammertone finish. The bars have a "squeeze-neck" height adjusting mechanism for ease of movement. Width between the rails is 26 inches. Model (NK 676) features 1.625-inch diameter stainless steel hand rails with chrome plating on base plates and extension arms. Height adjustment utilizes both a spring loaded plunger locking pin and squeeze tight sec
Chrome Pulley Unit (Models Nk 665 & Nk 665D)
The Chrome Pulley Unit is an overhead therapeutic pulley designed to assist an individual in an exercise program requiring prone, sitting or standing exercises. The unit has complete floor to ceiling adjustment to allow for any angle of pull required for exercise program. The unit is chrome plated and equipped with 200 pound test nylon cables, aluminum pull handle, ankle wrist cuff, and six 2 1/2 pound slotted disc weights. The overhead pulley system is built into the unit and can fit in a room
Footstool (Model Nk 705)
The Footstool, model NK 705, is designed with wide base legs and a large top surface for stability. The legs are made of chromed metal tubing with rubber tips and the top is covered with a non-slip rubber mat. DIMENSIONS: 14 x 10 x 8 inches high.